t10-install

T10 Install

144.1 dB*
60°-120° Fixed Variable Directivity
40 Hz-20 kHz
T10 Install brings the exceptional voicing of the Trinity series to performance installations and live event spaces. Stunning SPL and clarity can be precisely controlled with variable coverage in both the vertical and horizontal planes. Intelligibility is dramatically improved by directing the system’s energy away from reflective surfaces as coverage is adjusted to meet the architectural design of the venue. The vertical angles are set during installation using a fixed rigging system, while horizontal angles are locked into one of 22 variable configurations. Finally, a combination of FIR and IIR filters is applied to ensure smooth frequency response throughout the listening area. Dual bandpass-loaded 10” transducers manage low-frequency response. The mid-frequency band is supported by two 6.5” midrange transducers affixed to the patented Coherent Midrange Integrator (CMI). A dual-diaphragm high-frequency transducer, coupled directly to an integrated planar waveguide, significantly reduces distortion across the high frequency band. A 3,000 W Class D amplifier maximizes headroom while maintaining crystal clear audio and exceptional output. The CMI waveguide seamlessly combines mid and high frequencies, coupled with precisely spaced low-frequency apertures for smooth and controlled directivity. It allows for variable adjustability from 60°-120° both symmetrically and asymmetrically so that designers can vary the directivity of individual modules within the array to enhance overall system performance.

Output Capability

40 Hz-20 kHz

Acoustic Properties

60°-120° Fixed Variable Directivity
10° Symmetric & Asymmetric
0°-12° Fixed Rigging System
1° Increments

Robotic Actuators

Transducers

2 x 10" Bandpass Loaded
2 x 6.5" on Coherent Midrange Integrator
1 x 4" Dual Diaphragm Planar Wave

Amplification

3-Channel Class D
3,000 W
Auto-Switching 100-240 V, 50-60 Hz
700 W
UDP over Ethernet

Input/Output Connections

Analog/AES
XLR/etherCON
powerCON TRUE1 – IP65

Physical Properties

47.6 kg/105 lb.
980 x 250 x 561
38.58 x 9.84 x 22.09
24 Modules
IP42/IP43
Void-Free, High-Grade Baltic Birch
6061-T6 Aluminum
EXL Polyurea
Powder Coated Aluminum
* Maximum SPL with Pink Noise Crest Factor 4 at 1 m (with limiters & DSP active)
75clone_t10a

75clone_t10a

75clone_t10c

75clone_t10c

75clone_t10-network

75clone_t10-network

75clone_pk-alliance-hub

75clone_pk-alliance-hub

75clone_t10a
Release DateCategoryFile TypeSize kBLanguage
T10 Install (Letter)11.15.2021Spec Sheetapplication/pdf641.88ENGDownload 'T10 Install-Spec Sheet-Letter.pdf'
T10 Install (A4)11.15.2021Spec Sheetapplication/pdf641.84ENGDownload 'T10 Install-Spec Sheet-A4.pdf'

PK Sound

235075 Ryan Rd.
Rocky View, AB T1X 0K3
Canada

PK Europe

Kasteelstraat 223
9255 Buggenhout
Belgium